Finally our store is open to the World!

R2C2 Starter kit PLUS

Why buy R2C2 Starter kit PLUS?

This is the most suitable pack for building a 3D printer.

  1. Fastest 3D Printer controller
  2. Quick and easy to install
  3. Faster starting - warming up is faster with more power.
  4. 24V 220W power supply - safe powerfull and good quality. Enough power to drive the extruder, motors and heated bed achieving the correct temperature and faster. 
  5. Made with high quality components 
  6. Professionally made

and more...

Be our guest and visit our shop.
Give us feedback about what you like or dislike and ideas. (info@3dprinting-r2c2.com)

News

All orders are shipped within 1-2 business days.

Submitted by pcasimiro on Mon, 04/23/2012 - 12:40

 

We have upgraded our logistic system to reduce the delivery time. 

All orders are now shipped within 1-2 business days following the day the order was placed and will be delivered in 24-48 hours (from the shipped date).

Tracking your order:

We are shipping through FedEx, as they guarantee a fast and efficient delivery within 24 to 48 hours in most countries of the world. Once your order is shipped, you will receive an email from Fedex with your tracking number.

 

 

You are not watching this post, click to start watching

Spar Point Group published an article on bitBox

Submitted by pcasimiro on Fri, 04/13/2012 - 09:48

SparJustin Toland contributing editor at the well-known Spar Point Group travelled to “the charming city” of Aveiro to interview the creators of R2C2.

We talked about the importance of a fast, 32-bit, high-quality motion controller developed specifically for 3D printing and highlighted our commitment to open source so people are able to adapt the controller’s firmware to their own products.

bitBoxWe gave special emphasis to the expansion board that is used for upgrading modules, for communications, wireless and others. “The new users [of 3D printers] will need to interact with our technology via the web and smartphones."

The value of the community and the future of the 3D data capture was also discussed. Whether this meant using smartphones for capturing directly the data or go to the web, select some parts designed by someone on Thingiverse and click and print it"

You may read the full article here: Part 1, Part 2

You are not watching this post, click to start watching

bitBox supports QuattroTeam at Robótica 2012

Submitted by pcasimiro on Thu, 04/12/2012 - 18:47

Roll Up Robotica 2012

Mário, our newest co-worker and his squad “QuatroTeam” are going to compete in Robótica 2012, the 12th Portuguese robotics open.

Their car, devotedly named Yoshi, uses parts that we helped design and develop. 

To produce Yoshi’s parts we used our 3D printer, equipped with the R2C2 kit.

Build your printer and print your ideas. Your imagination is the limit!

Yoshi
Our partners Luis Coelho (on left) and Pedro Coelho (on right) helped with the photoshoot session. 
Mário (on center) designed the 3D parts and assembled the car.
You are not watching this post, click to start watching

Another happy customer!

Submitted by pcasimiro on Tue, 04/10/2012 - 10:51

R2C2 Starter kit PLUS

Rui Ribeiro, a Portuguese SW engineer and an active member of our development board, just sent us an email stating that his Prusa came to live!

We are happy to know that his 3D printer is working and proud to see our R2C2 kit as the heart of the RepRap Prusa.

Checkout the video he published on youtube:

You are not watching this post, click to start watching

We continue to improve our services!

Submitted by casainho on Wed, 04/04/2012 - 12:33

We are now shipping via FedEx: international orders are delivered in 24/48 hours in most countries of the world.

Tracking available: You'll receive an email from Fedex with your tracking number and information on the status of your shipment.


We take the time to adequately prepare items for shipment and your R2C2 kit will be safely delivered at your door.

You are not watching this post, click to start watching

R2C2 controlling a CNC machine

Submitted by casainho on Fri, 01/13/2012 - 17:33

Pauljay from South Korea sent us a picture showing his CNC machine and R2C2 board, which he is using for controlling the CNC Smile

You are not watching this post, click to start watching

Printf.bot prints!! This is the new RepRap 3D Printer

Submitted by casainho on Sat, 12/31/2011 - 20:45

It's missing only a few hours of year 2011 but we were able to put Printf.bot printing before the new year Smile

Printf.bot is our prototype of the new RepRap 3D Printer, designed by Whosa whatsis in OpenSCAD. Whosa whatsis did a great job!

It (Parametric printrbot variant) is inspired by the Printrbot, but is a complete redesign in OpenSCAD to be more robust (without the loose press-fit mountings), but still extremely simple.

This new RepRap 3D Printer have a RepRap wiki page that  we helped to improve. We also shared some photos and this video there.

You are not watching this post, click to start watching

Seasons greetings

Submitted by casainho on Wed, 12/28/2011 - 23:53

Bob implemented beep code on R2C2 firmware so that GCode files could notify important events. As an example of the possibilities, he created a GCode file to play some seasonal music:

If you are curious about the beep code, here is the first lines of the GCode file that plays on the video:

; Jingle Bells
M300 S294 P400
M300 S0 P100
M300 S294 P400
M300 S0 P100
M300 S494 P400
M300 S0 P100
M300 S440 P400
M300 S0 P100
M300 S392 P400
M300 S0 P100
M300 S294 P800
(...)

You are not watching this post, click to start watching

New RepRap 3D Printer -- Printf.bot "prototype"

Submitted by casainho on Mon, 12/26/2011 - 19:40

Printf.bot is our prototype of the new RepRap 3D Printer, designed by Whosa whatsis in OpenSCAD. Whosa whatsis did a great job!

It (Parametric printrbot variant) is inspired by the Printrbot, but is a complete redesign in OpenSCAD to be more robust (without the loose press-fit mountings), but still extremely simple.

Here is our video showing R2C2 driving Printf.bot at 150mm/s and 3500mm/s^2 (recorded on 2011.12.25):

This new RepRap 3D Printer have a RepRap wiki page that  we helped to improve. We also shared some photos and this video there.

You are not watching this post, click to start watching

New power jack on latest version of R2C2 boards

Submitted by casainho on Sat, 11/26/2011 - 16:32

We got the latest version of R2C2 boards and we went to test the new power jack. We changed to a new one of higher quality/price for three main reasons:

You are not watching this post, click to start watching
Syndicate content